Fitorch MR35

The Fitorch MR35 is a compact multi-spectrum tactical flashlight that combines a powerful white Cree XP-L LED with high-power red, green, blue and UV emitters – all centred in a single reflector. White output reaches up to 1200 ANSI lumens with a beam distance of around 180 m, while the colour LEDs deliver strong, usable output for hunting, map reading, marking, ID checks and scene management.

The white channel offers Turbo, High, Medium and Low with up to 350 h runtime on Low. RGB+UV modes are accessed via the side switch and run independently from the white modes, giving you fast access to red/green/blue/UV without losing your main brightness setting.

A dual-switch interface keeps control intuitive: the tailcap switch handles on/off and momentary use, while the side switch controls mode changes, colour selection and special functions. The MR35 features mode memory (white channel), a location beacon (breathing green LED every 2.5 s), battery voltage check to 0.1 V, low-power warning and ATR (Advanced Temperature Regulation) for safe, stable operation.

Charging is built in: a micro-USB port under a rubber cover lets you top up a single 18650 cell inside the light. The MR35 can also be powered by 2× CR123A lithium primaries for environments where charging isn’t an option.

The body is HA-III hard-anodised aerospace aluminium with metal-filmed reflector, coated tempered mineral glass, and full O-ring and gasket sealing. With IPX8 waterproofing and 2 m impact resistance, plus included nylon holster, lanyard, USB cable, pocket clip and spare O-ring, the MR35 is ready for real field use by sport shooters, police and defence users who need both strong white light and reliable colour/UV capability.

 general features

• White + RGB + UV in one light – 5 separate LED chips (white, red, green, blue, UV) aligned in a single reflector.

• 1200 lm max white output, with Turbo/High/Medium/Low modes for general and tactical use.

• Strong colour channels: Red 90 lm, Green 90 lm, Blue 30 lm + UV (365–370 nm) for tracking, signalling, blood/spore contrast and document/trace checks.

• Dual switch UI – tail switch for on/off & momentary, side electronic switch for brightness, colours and special modes.

• Micro-USB rechargeable – charge the 18650 directly inside the flashlight.

• Smart electronics – ATR temperature control, low-power warning, voltage check (0.1 V resolution), power auto-detection, location beacon.

• Rugged build – HA-III military hard-anodised aluminium, metal-filmed reflector, coated mineral glass, IPX8, 2 m drop tested.

Specifications

Specifications:

Optical – white LED

• LED (white): Cree XP-L

• Max output (Turbo): 1200 lm

• Other white modes (ANSI chart):

  • High: 330 lm

  • Medium: 100 lm

  • Low: 8 lm

• Runtime (1× 18650 3500 mAh, typical):

  • Turbo: 1.5 h

  • High: 6 h

  • Medium: 20 h

  • Low: 350 h

• Peak intensity: 13,300 cd

• Beam distance: 180 m (max)

Optical – colour & UV

• Red: 90 lm (625–630 nm)

• Green: 90 lm (525–530 nm)

• Blue: 30 lm (460–465 nm)

• UV: 365–370 nm (output not specified in lm)

Electronics & UI

• Switches:

  • Tailcap mechanical switch – on/off, momentary

  • Side electronic switch – brightness, colours, strobe/SOS, beacon, voltage check

• White mode cycle: Turbo → High → Medium → Low → Medium → High → Turbo (Human Access UI)

• Colour mode cycle: Red → Green → Blue → UV (press & hold side switch while on)

• Special modes: Strobe & SOS (white), plus red/blue police flash and blue-only flash (multi-tap from side switch).

• Location beacon: breathing green blink every 2.5 s (configurable).

• Battery indicator: voltage display via side-switch LED, resolution 0.1 V.

• Input voltage: DC 2.75–6.0 V

Power & charging

• Power source:

  • 1 × 18650 Li-ion (3.7 V, recommended)

  • or 2 × CR123A lithium (3.0 V each) – no 16340 allowed

• Charging: integrated micro-USB port on body (0.8–1 A typical).

Mechanical

• Material: HA-III military hard-anodised aluminium alloy

• Housing: Premium Type III hard-anodised, anti-abrasive black finish

• Dimensions:

  • Head diameter: 40 mm (1.57")

  • Length: 147.5 mm (5.8")

• Weight: 170.2 g (without battery)

• Waterproof: IPX8 (2 m submersible)

• Impact resistance: 2 m

Typical kit contents

• 1 × Fitorch MR35 flashlight

• 1 × USB charging cable (micro-USB)

• 1 × Nylon holster

• 1 × Removable pocket clip

• 1 × Lanyard

• Spare O-ring / snap cap

• User manual

Pros & Cons

Pros

• All-in-one spectrum tool: strong white plus real-output RGB and usable UV in a single, compact tactical body.

• Integrated micro-USB charging – no separate charger needed for routine use.

• Advanced UI & telemetry: voltage read-out, beacon, ATR, mode memory and low-power protection – usually found on higher-end lights.

• Dual-switch layout is excellent for tactical users: tail for hard on/off, side for everything else.

• IPX8 and 2 m impact-rated with good accessories (holster, clip, lanyard) included.

Cons

• Micro-USB instead of USB-C – technically a generation behind on charging.

• Beam from RGB/UV emitters is less clean than the white channel (typical for multi-LED single reflector designs).

• UI is richer than a simple “High/Low” tactical light – some users will need a short learning curve.